Shakers feature a triple eccentric drive that handles heavy workloads, provides uniform agitation and enables continuous 24-hour operation even at high speeds. Water bath temperature is monitored and controlled over the entire range with accuracy of ±0.2°C at 37°C in flask with PID temperature controller. Easy access drain system with quick disconnect is located in the front of the cabinet. Minimize splashing and turbulence in the chamber with twin baffles even at high speeds. Prevent heat loss and minimize evaporation with the use of optional covers.
Digital Operating System
Solid state DC brushless motor, variable speed control from 15 to 500 rpm, and continuous and timed operation from 0.1 hour up to 99.9 hours or 0.1 minute to 99.9 minutes. Displayed time counts up during continuous operation and down during timed runs. View speed, operating time and temperature simultaneously on 3 individual LED displays which helps minimize errors in establishing running conditions. Visual/audible signals alert you to temperature deviations and low water levels. Heat turns off if temperature deviates ±1°C of setpoint. RS232 interface allows remote monitoring of speed, time and temperature. Over temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails. Complete system requires shaker, platform and clamps. Contact us for options available. 110V.
Speed Range: 15 to 500 ±1rpm
Orbit Diameter: 1/2"
Maximum Load: 107 lbs.
Temperature range: 5°C above ambient to 65°C
