Can Seam Micrometers
Specifically designed to measure seam
thickness and seam height. Range is 0 to 0.375” ( 0 to 9.0mm for
metric micrometers). Graduated in .001” (.01mm) with ratchet stop
to prevent false readings from overtightening. The snub-nosed micrometers
are designed for necked-in beverage cans and aerosol cans.
| Cat. No. |
Description |
| 10770-00 |
Can Seam Micrometer, inch, for sanitary
cans |
| 10770-01 |
Can Seam Micrometer, metric, for sanitary
cans |
| 10770-05 |
Snub-nosed Can Seam Micrometer, inch,
for beverage and aerosol cans |
| 10770-06 |
Snub-nosed Can Seam Micrometer, metric,
for beverage and aerosol cans |
Nippers
A convenient, all-purpose hand tool used
for hand teardown of can seams. Vinyl coated hand grips, jaw width
is 1”, overall length is 6”
Cat. No. Description
10771-00 Nippers
Headspace Gauge
When the clear plastic teeth of the headspace gauge contact the liquid level in a container, the diffused light indicates the headspace to 1/32"
Cat. No. Description
10769-00 Headspace Gauge
Sanitary Can Opener
A unique opener used to remove the center
section of the can end while keeping the double seam intact. Overall
length 11”.
Cat. No. Description
10810-01 Sanitary Can Opener
Canner’s Vacuum Gauge
Used to measure the vacuum pressure of
seamed cans. The gauge is placed on top of the can and the piercing
needle is forced through the top of the can. The rubber collar forms
a temporary seal to allow for measurement. Consists of a 0 to 30”
Hg vacuum gauge, pierce point, and rubber collar. Also available
with dual scale to measure pressure to 15 psi.
| Cat. No. |
Description |
| 10816-00 |
Vacuum Gauge, Canner’s Model, 0 – 30”
Hg |
| 10816-50 |
Vacuum and Pressure Gauge, Canner’s Model,
0 – 30”Hg and 0 – 15psi |
|
|
